English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
| Part I: Standard Parts heating | ||||
| Tube Furnace |
Display | LED Display(Computer Control) | ||
| Max. Temperature | 1200 | |||
| Continuous Temp Working ≤1100℃ | ||||
| Temperature Zone | 150*200*150mm(3 Zones) independent temperature control |
|||
| Heating Element | Electric wire with Mo | |||
| Thermocouple | N type | |||
| Temperature Accuracy Control ±1℃ | ||||
| Tube Size |
160x 1000mm (OD x minimum L) 150mm(ID±2mm) Thickness 5mm Customizable |
|||
Material:Quartz tube |
||||
| Temperature Control | PID automatic control via SCR power control |
|||
| Heating curves | 30 steps programmable | |||
| Safety Element |
Over-temperature Alarm Over-current protection Power off when door open Thermocouple broken indication |
|||
| Vacuum Flange |
One side is stainless steel water cooled vacuum flange with valve, the other side is water cooled hinged vacuum flange. Adopt Viton O-rings. Each Outlet has a PSV.  Including Air actuated on-off valve, linked to PSV and MFC(when pressure beyond 1 bar, both the MFC and furnace should be cut off, PSV release high pressure. |
|||
| 3 way Valve | One for KF25 vacuum valve Second for 1/8” valve Third for 1/2” valve(to bubbler) |
|||
| Output Power | Base on the final design | |||
| Part 2 Vacuum pump system | ||
| Vacuum Pump |
  VRD-8 rotary vane pump with pumping speed 2.2L/s vacuum pump+Flapper valve Vacuum rate: -0.1mpa(Relative pressure) |
|
| Part 3 4 way Mass flow meters | ||
| 4 Way Mass Flow Meters (Computer control) |
Four precision mass flow meters : MFC1: 0 to 2000 sccm, Accuracy ±-1.5%F.S. H2 MFC2: 0 to 2000 sccm Accuracy ±-1.5%F.S. CO2 MFC3: 0 to 2000sccm Accuracy ±-1.5%F.S. CH4 MFC4: 0 to 2000 sccm Accuracy ±-1.5%F.S. Ar 4 stainless steel needle valves is installed on left side of bottom case to control 4 type gases mixing manually MFC could be controlled on the computer. l Mixing gas will be pre-heating at 100-200C before flow into the furnace tube. l SS tube with sprial shape l  (For reference only) |
|
